Solve The Jaw Crusher Temperature Rise

SBM is a high-tech enterprise, involved in research and development, production, sales and service as well. In the past 20 years, we are committed to the production of mining equipment, sand making equipment, industrial mill, provide highway, rail way and water conservancy engineering sand to make high-grade equipment and related solutions.

Solve The Jaw Crusher Temperature Rise

When the jaw crusher is in normal work, it will generate heat itself. If the temperature is too high, the consumption of the wearing parts of the jaw crusher will become more and more serious, which will affect the normal operation of the equipment and reduce the working efficiency. In order to reduce the production efficiency, we now analyze the cause of the temperature rise of the crusher and how to prevent the high temperature of the crusher.

First, the bearing temperature is high. The bearing of the jaw crusher bears the full load of the machine. When the machine is working, always pay attention to the temperature of the bearing, because sometimes the machine will be stuck by the material that is not easily broken or the hammer and other parts will occur. Damage or poor bearing lubrication can cause the bearing to heat up and the temperature rises, resulting in high temperatures during machine operation. If it is found to be abnormal, stop the vehicle immediately, find out the cause, and solve it in time.

Second, the friction component temperature high jaw crusher in the high-speed operation process, continuous friction work power consumption, these will all be converted into heat, causing the temperature of the friction components to rise, so that the machine temperature rises, affecting the normal operation of the work . When lubricating with lubricating oil, heat is continuously extracted from the friction surface to be dissipated, or a certain amount of oil is supplied to move the tropics, so that the temperature of the friction surface is lowered.

Third, the working principle of the high-E-type jaw crusher is to use the moving jaw plate to approach the fixed jaw plate, and to carry out the upper and lower repeated movement of the extruded material to achieve the purpose of crushing. When the material is broken, the moving jaw leaves the fixed jaw, and the product is discharged. The discharge of the material is obvious; it can be seen that the working intensity of the moving jaw is very large, and it is easy to cause the temperature of the moving jaw to rise, which leads to an increase in the temperature of the machine. When necessary, certain measures must be taken to solve the abnormal temperature rise of the moving E and ensure normal production.

Inquiry

Please fill in your name and your message and do not forget mail and/or phone if you like to be contacted. Please note that you do not need to have a mail programme to use this function.